Sony FX52L - Manual (Page 54)

54
Specifications
• When a signal other than the preset signals shown above is input, the picture may not
appear properly.
• Memory numbers 22 and 34 are interlace signals.
• When an SXGA+ signal is input, the image may extend beyond the edge of the
screen. In this event, input a signal in which the image is not surrounded by a black
area, and then unplug and then plug back in the connecting cable, or else press the
INPUT key and select the input signal again.
34 1,280
× 1,024
SXGA VESA 43 Hz 46.433 86.872 H-pos, V-pos 1,696
35 SGI-5 53.316 50.062 S on G 1,680
36 SXGA VESA 60 Hz 63.974 60.013 H-pos, V-pos 1,696
37 SXGA VESA 75 Hz 79.976 75.025 H-pos, V-pos 1,688
38 SXGA VESA 85 Hz 91.146 85.024 H-pos, V-pos 1,728
39 1,600
× 1,200
UXGA VESA 60 Hz 75.000 60.000 H-pos, V-pos 2,160
43 480/60P 480/60P
(Double frequency
NTSC) 31.470 60.000 S on G
44 575/50P 575/50P
(Double frequency
PAL) 31.250 50.000 S on G
45 1,080/50I 1,080/50I 28.130 50.000
47 720/60P 720/60P 45.000 60.000
48 720/50P 720/50P 37.500 50.000
50 540/60P 540/60P 33.750 60.000
52 1,400
× 1,050
SXGA+ 63.981 60.020 H-neg, V-neg 1,688
Notes
Memory
No. Preset signal fH (kHz) fV (Hz) Sync SIZE