Shelby CS-500S - Manual (Page 5)

. .
. .
5 24
WARNINGS:
As with any product that performs automatic functions, there are certain
safety precautions that you must practice and be aware of.
1. Keep ALL transmitters out of the reach of children.
2. The use and operations of this system is the sole responsibility of the
operator.
IMPORTANT NOTICE
OPERATION
A. REMOTE TRANSMITTER OPERATION:
Transmitter
Button System Function or Feature Remark
Lock Doors & Arm System
- Arm and Delete The 2 Stage Shock Sensor. Press twice within 3 seconds
- - Arm and Noiseless Mode Press within 3 seconds
- Arm System and Hidden Alarm Function Press within 3 seconds
+ Silent Arming / Disarming Ignition in "off" position.
+ (2-sec.) Active Anti Car-Jacking Mode Ignition in "on" position press
and hold for 2 seconds
Unlock Doors & Disarm System
- Two Steps Door Unlock & Disarm System Press twice within 3 seconds.
(2-sec.) Trunk Release (Channel 3) Press and Hold for 2 seconds
- Passive Arming By-pass While the system Disarmed.
- - Remote Control Entry/Exit Valet Mode While the system Disarmed,
Press within 3 seconds
+ Channel # 4 Timer Output
Car Locator
(3-sec.) Panic function Press and Hold for 3 seconds.
4. Press the F button once again then the “Minutes” digit flashes
for adjusting.
5. Press the or button to decrease or increase the “Minute” digit
until 2:30.
6. Press the F button once again then icon flashes for the alert
alarm “ON / OFF” setting
7. Press the button to start the count down timer, and the “ON” icon
will display on the LCD screen. Press the button to stop the count
down timer, and the “OFF” icon will display on the LCD screen.
8. Press the F button for 2 seconds with one-melody sound to
confirm exiting the timer program mode.
Note: Maximum is 19 hours.
LCD REMOTE CONTROL TRANSCEIVER