Samsung SP-H700 - Manual (Page 32)

Connecting to PC
Connecting to PC
Connecting to PC
You can connect a PC to the projector and use it as a monitor.
Connecting to PC
Connecting to PC
62 63
Turn on the projector and press the PC button
to select PC. If the projector is connected to
DVI, press the DVI button to select DVI.
■ If PC Mode is not available, check PC video cable is
in place.
Turn on the PC and set the PC Environment
when necessary. (Page 61)
Adjust the screen. (Pages 64~68)
1
2
3
NOTE
■ Enjoy better picture quality by using DVI-D cable (supports digital signals only)
instead of PC Video cable.
■ DVI-I cable (supports analog signals) is not supported. Use DVD-D cable.
■ Sound comes out from PC speakers.
NOTE
This product supports Plug & Play. No driver installation is needed for Windows XP.
CAUTION
DVI-D cable does not support
analog RGB signals.
PC Video Cable
(15-pin signal)
DVI-D
(supports only digital signals)
Rear side of Projector
PC
1
PC
DVI-D Video
Cable
PC Video
Cable
or
Rear Connection
Using PC Video Cable or DVI Cable
1
DVI-D Port
Viewing the PC Screen
This appliance supports VESA Plug & Play and
recognizes connection to PC automatically.
VESA Plug & Play
Pin Configuration of PC Video Port Plug
Connect PC (RGB In) port on the rear side of the projector to the monitor output port
of PC using PC video cable.
■ If PC has a DVI output port, connect it to DVI port of the projector.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Red (R)
Green (G)
Blue (B)
Ground
Ground (DDC)
Red (R) Ground
Green (G) Ground
Blue (B) Ground
Reserved
Ground Sync
Ground
Data (DDC)
Horizontal Sync
Vertical Sync
Clock (DDC)
Pin No. PC Input
1
2
3
4
5
6
7
8
9
10
11
12
T.M.D.S. DATA2-
T.M.D.S. DATA2+
T.M.D.S. DATA2/4 Shield
T.M.D.S. DATA4-
T.M.D.S. DATA4+
Clock (DDC)
Data (DDC)
No Connection
T.M.D.S. DATA1-
T.M.D.S. DATA1+
T.M.D.S. DATA1/3 Shield
T.M.D.S. DATA3-
Pin No. Signal
13
14
15
16
17
18
19
20
21
22
23
24
T.M.D.S. DATA3+
+5V Power
Ground for 5V
Hot Plug Detect
T.M.D.S. DATA0-
T.M.D.S. DATA0+
T.M.D.S. DATA0/5 Shield
T.M.D.S. DATA5-
T.M.D.S. DATA5+
T.M.D.S. Clock Shield
T.M.D.S. Clock+
T.M.D.S. Clock-
Pin No. Signal