Sony BKP-7933 - Manual (Page 47)

1-41 (E)
BKP-7933
1-9-3. Modification of RCP-720
Required Part
Description Sony P/N Q'ty
Jumper wire _ _
Modification Procedure
1. Connect the two jumper wires by soldering. (SW-754 board)
Between pin-6/CN3 and D25 cathode (1)
Between pin-5/CN3 and pin-2/S24 (2)
2. Disconnect CN101/CN-1187 board.
Setting Switch on MPU-92 Board
S4-7/MPU-79 board
→
ON
1-9. Modification of RCP