Sanyo TLS-224P - Manual (Page 17)

ALARM RECORDING
Alarm Scan
To look for an alarm recording by viewing the first 5
seconds of each alarm recording.
1
Press the PAUSE/SCAN button during stop mode.
° “AL SCAN” will be displayed on screen.
2
Press the FF (or REW) button.
° The unit will advance (or rewind) the tape at
high speed and playback the first 5 seconds of
every alarm recording.
° To cancel the alarm scan mode, press the
STOP
button.
3
While the desired recording is being played back,
press the PLAY button.
° Playback will start, alarm scan mode is
cancelled.
GB
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998
16 English