Programme timer recording – Sanyo TLS-224P User Manual
Page 18
PROGRAMME TIMER RECORDING
There are two programme timer recording methods,
daily recording or recording on certain days of the week.
Example 1:
To record on every Saturday from
9:00 AM to 5:00 PM (17:00), in
24-hour mode (recording speed).
1
Make sure that the set date and time are correct.
2
Load a cassette tape with erasure-prevention tab.
3
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is displayed.
°
“SUN” (Sunday) will be flashing.
4
Press the
]
button, until “SAT” (Saturday) is
flashing.
5
Press the
«
button.
°
The recording start hour position starts
flashing.
6
Press the
l
(or
j
) button to set the recording start
hour (ex: 09), then press the
«
button.
°
The recording start minutes position starts
flashing.
7
Press the
l
(or
j
) button to set the recording start
minutes (ex: 00), then press the
«
button.
°
The recording stop hour position starts
flashing.
8
Press the
l
(or
j
) button to set the recording stop
hour (ex: 17), then press the
«
button.
°
The recording stop minutes position starts
flashing.
NOTE:
•
If the set stop time is earlier than or the same
time as the set start time, the VCR will consider
the stop time to be the following day, and “T” will
be displayed next to the recording stop time.
9
Press the
l
(or
j
) button to set the recording stop
minutes (ex: 00), then press the
«
button.
°
The “SPD” (recording speed) position will start
flashing.
F
Press the
l
(or
j
) button to select the recording
speed (ex: 24), then press the
«
button.
°
“N” will start flashing.
G
Press the
l
(or
j
) button to select “Y”.
Y. . . . . . . . . . . . . . recording will take place
N. . . . . . . . . . . . . . recording will not take place
°
Repeat steps
4
to
G
to programme timer
recordings for other days of the weeks.
H
Press the PAUSE/SCAN button, the normal screen
is displayed.
I
Press the TIMER button.
°
The timer recording indicator “
n
”
will light on
the digital display, the VCR is now in timer
recording stand-by mode.
NOTES:
•
To modify, cancel or stop timer recording, press the
TIMER button to cancel the timer recording mode.
•
A timer recording of more than 24 hours can only be
set on the 7th and 8th lines. On the 7th line, set the
recording start time and set “
öö
” for the rest of the
line. On the 8th line, set “
öö
” for the START time
position, then set the recording stop time, recording
speed, and select “Y” or “N”.
•
To record everyday at the same time, at step
4
select the “DLY” line.
<TIMER SET>
WEEK START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT --:-- --:-- --- N
DLY --:-- --:-- --- N
EXT ¤¤¤¤¤ ¤¤¤¤¤ --- N
<TIMER SET>
WEEK START STOP SPD
SUN --:-- --:-- --- N
MON --:-- --:-- --- N
TUE --:-- --:-- --- N
WED --:-- --:-- --- N
THU --:-- --:-- --- N
FRI --:-- --:-- --- N
SAT 09:00 17:00 24 Y
DLY --:-- --:-- --- N
EXT ццццц ццццц --- N
GB
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998
English
17