Programme timer recording – Sanyo TLS-224P User Manual
Page 19
PROGRAMME TIMER RECORDING
Setting the Holidays
By setting the holidays, timer recording will be
conducted on those days, as set for Sundays.
1
Press the AUDIO ON/MENU button until the
(HOLIDAY SET) menu is displayed.
2
Press the
l
(or
j
) button to set the day of the
holiday, then press the
«
button.
3
Press the
l
(or
j
) button to set the month of the
holiday.
4
Press the
«
(or
]
) button, the next line to set starts
flashing.
°
Repeat steps
2
to
4
to set up to 20 holidays.
5
Press the PAUSE/SCAN button, the normal screen
is displayed.
°
The setting procedure is now completed.
NOTE:
•
If setting holidays, be sure that a timer recording is
set for Sunday. If not, this function will not operate.
Changing a Programme Timer
Recording
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is display.
2
Press the
«
(or
]
) button, until the setting to
correct is flashing.
3
Press the
l
(or
j
) button, to correct the setting.
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
5
Press the TIMER button.
To Cancel a Programme Timer
Recording
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is displayed.
2
Press the
«
(or
]
) button, until the “Y”
corresponding to the timer recording to cancel is
flashing.
3
Press the
l
(or
j
) button, to select “N”.
4
Press the PAUSE/SCAN button, the normal screen
is displayed.
5
Press the TIMER button.
To Cancel all Programme Timer
Recordings
1
Press the AUDIO ON/MENU button until the
(TIMER SET) menu is displayed.
2
Press the MENU RESET button.
°
All programmed timer recordings are erased.
3
Press the PAUSE/SCAN button, the normal screen
is displayed.
<HOLIDAY SET>
1 ----- 11 -----
2 ----- 12 -----
3 ----- 13 -----
4 ----- 14 -----
5 ----- 15 -----
6 ----- 16 -----
7 ----- 17 -----
8 ----- 18 -----
9 ----- 19 -----
10 ----- 20 -----
Month
Day
GB
NE4QG/EX (TLS-224P GB) Mon. May, 11/1998
18
English