Schneider Electric SMART-UPS 750VA - Manual (Page 7)

Smart-UPS X-Series Operation 4
Display Interface
Overview
Using the display interface
Use U P and D OWN to scroll through the main menu options. Press E NTER to view the sub-menus under
each main menu option. Press E SCAPE to exit a sub-menu and return to a main menu.
Standard Menus
The Standard menus are the most commonly used menus for the UPS.
 Online indicator

UPS Output On/Off button

On Battery indicator

Fault indicator

Replace Battery indicator

Display screen

U P / DOWN buttons

E NTER button
E SCAPE button
Menu General Functions
Status View basic information about the UPS:
• Operating mode
• Controllable Outlet state, On or Off
• Efficiency of the UPS
• Information about the load
• Battery capacity
• Estimated runtime
• Input and output voltage and frequency
• Information about the last transfer to battery power
• Self-test results
Configuration Configure the settings for the UPS:
• Language
• Local power quality: Good, Fair, Poor
• Choose Standard or Advanced menus
• LCD Display mode, Always On or Power-Saving
• Audible alarms
• Reset to Factory Defaults
Test & Diags Use the Test & Diags menu to have the UPS perform a
self-test.
s
u
03
43
a
APC by Schneider
Electric