Sony DAV-LF1H - Manual (Page 31)

31 GB
Ge
tting
Star
te
d –
B
A
SIC –
• When you install the surround speaker (L) to the
right position, the system sets the “SL SR
REVERSE” setting (page 100) to “ON”
automatically.
13
Unplug the calibration mic and press C /
c to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Note
• Reflections from walls or the floor may affect
measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
To quit the Quick Setup
Press DISPLAY in any Step.
Tip
• If you cancel [AUTO CALIBRATION], perform the
speaker settings in “Settings for the Speakers”
(page 98).
• If you change the position of the speakers, reset the
speaker settings. See “Calibrating the Appropriate
Settings Automatically” (page 88).
• If you want to change any of the settings, see “Using
the Setup Display” (page 91).
• For details on [AUTO CALIBRATION] and the error
messages of [AUTO CALIBRATION], see
“Calibrating the Appropriate Settings Automatically”
(page 88).
To recall the Quick Setup display
1
Press DISPLAY when the system is in
stop mode.
The Control Menu appears.
2
Press X / x to select [SETUP], then
press .
The options for [SETUP] appear.
3
Press X / x to select [QUICK], then press .
The Quick Setup display appears.
FRONT L :
FRONT R :
CENTER :
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.
YES
4.8m 0.0dB
4.8m 0.0dB
4.8m + 1.0dB
4.8m + 4.0dB
3.0m - 2.0dB
3.0m - 2.0dB
Measurement complete.
NO
1 2 ( 2 7 )
QUICK
QUICK
RESET
DVD VIDEO
BNR
1 8 ( 3 4 )
CUSTOM
T 0 : 0 0 : 0 2