Sony CMT-HX70BTR - Manual (Page 12)

CMT-HX70BTR/HX50BTR.GB.3-294-004-11(1)
1 GB
To use the remote
Slide and remove the battery
compartment lid  , and insert the two
supplied R6 (size AA) batteries,  side
first, matching the polarities shown
below.
Notes
 With normal use, the batteries should last for
about six months.
 Do not mix an old battery with a new one or
mix different types of batteries.
 If you do not use the remote for a long period
of time, remove the batteries to avoid damage
from battery leakage and corrosion.
Setting the clock
Use buttons on the remote to set the
clock.
1
Press /  to turn on the
system.
2
Press TIMER MENU  .
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the display,
press /  repeatedly to select
“CLOCK SET?” and then press  .
3
Press /  repeatedly to set
the hour, and then press  .
4
Use the same procedure to set
the minutes.
The clock settings are lost when you
disconnect the power cord or if a
power failure occurs.
To display the clock when the system
is off
Press DISPLAY  . The clock is displayed
for about 8 seconds.