Sony CMT-HX70BTR - Manual (Page 26)

CMT-HX70BTR/HX50BTR.GB.3-294-004-11(1)
 GB
 The audio formats that you can listen to with
this system are as follows:
 MP3: file extension “.mp3”
 Windows Media Audio file: file extension
“.wma”
 AAC: file extension “.m4a”
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
 Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
Using optional audio
components
1
Connect additional audio
component to the AUDIO
IN jack
 on the unit using
an audio analog cord (not
supplied).
2
Turn down the volume.
Press VOLUME  (or turn the
VOLUME control on the unit)  .
3
Select the AUDIO IN function.
Press FUNCTION +/ (or
FUNCTION on the unit) 
repeatedly.
4
Start playing the connected
component.
5
Adjust the volume.
Press VOLUME +/ (or turn the
VOLUME control on the unit)  .