Basic oper ations to remove the usb device, Folder and file generation rules, Continued – Sony CMT-HX70BTR User Manual
Page 23
CMT-HX70BTR/HX50BTR.GB.3-294-004-11(1)
GB
Basic Oper
ations
To remove the USB device
1
Select the USB function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
2
Hold down
on the unit in stop
mode until “No Device“ appears.
3
Remove the USB device.
To erase audio files or folders from the
USB device
You can erase audio files or folders from
the USB device.
1
Connect a recordable USB device to
the
(USB) port
.
2
Select the USB function.
Press FUNCTION +/ (or
FUNCTION on the unit)
repeatedly.
3
Press /
or
+/
repeatedly to select the audio file or
folder you want to erase.
4
Press USB MENU
on the unit.
“Erase?” appears.
5
Press (or ENTER on the unit)
.
“Track Erase?” or “Folder Erase?”
appears in the display.
To cancel the erase operation, press
.
6
Press (or ENTER on the unit)
.
The selected audio file or folder is
erased.
Folder and file generation rules
When first recording to an USB device,
a “MUSIC” folder is created directly
below the “ROOT.” Folders and files are
generated within this “MUSIC” folder
as follows according to the recording
method.
Synchro Recording
1)
Recording
source
Folder name
File name
MP3
Same as the recording source
2)
CD-DA
“CDDA001”
3)
“TRACK001”
4)
REC1 recording
Recording
source
Folder name
File name
MP3
“REC1”
5)
Same as the
recording
source
2)
CD-DA
“TRACK001”
4)
1)
In Program Play mode, the folder name is
“PGM_xxx,” and the file name depends on
the recording source (CD-DA disc or MP3
disc).
2)
Up to 32 characters of the name are assigned.
3)
Folder numbers are assigned serially
thereafter up to the maximum 999 (including
the “ROOT” and “MUSIC” folders).
4)
File numbers are assigned serially thereafter.
5)
A new file is recorded in the “REC1” folder
each time REC1 recording is performed.
Continued