Sony CMT-HX70BTR - Manual (Page 22)

CMT-HX70BTR/HX50BTR.GB.3-294-004-11(1)
 GB
Recording a single track or MP3
file during playback (REC1)
You can easily record the track or MP3
file that is currently being played back
onto an USB device.
1
Connect a recordable USB
device to the (USB) port
 .
2
Select the CD function, then
load the disc you want to
record.
3
Select the track or MP3 file you
want to record, then start play.
4
Press CD-USB SYNC/REC1  on
the unit while the selected track
or MP3 file is being played back.
“REC” flashes, and the display cycles
through “REC 1,” “xxxMB Free”
(remaining space on the USB device)
and “Push ENTER.”
The USB device stands by for
recording and the CD player pauses
for play.
5
Press (or ENTER on the unit)
 .
Recording starts. When the recording
is completed, the CD player continues
to play.
To select the recording destination on
the USB device
If the USB device has more than one
memory (for example, internal memory
and a memory card), you can select
which memory to read to and then start
recording.
1
Connect the USB device to the
(USB) port  .
2
Select the USB function.
Press FUNCTION +/ (or
FUNCTION on the unit) 
repeatedly.
3
Press USB MENU  on the unit in
stop mode.
“Select?” appears. If an audio file or
a folder is selected, “Erase?” appears
instead. Press /  repeatedly
to select “Select?.”
4
Press (or ENTER on the unit)  .
The name of a memory appears.
The displayed name varies depending
on the specifications of the USB
device.
5
Press /  repeatedly to
select the memory.
Proceed to step 6 if only one memory
can be selected.
To cancel this operation, press   .
6
Press (or ENTER on the unit)  .
7
Start recording by following steps 2
thorough 5 of “Synchro Recording” or
“Recording a single track or MP3 file
during playback (REC1).”
To stop recording
Press   .