Samsung BN68-01780A-00 User Manual

Page 7

Advertising
background image

English - 

DVI IN(hDMI) [R-AUDIO-L]

DVI audio outputs for external devices.

Supported modes for HDMI/DVI and Component

480i

480p

576i

576p

720p

1080i

1080p

HDMI/DVI 50Hz

X

X

X

O

O

O

O

HDMI/DVI 60Hz

X

O

X

X

O

O

O

Component

O

O

O

O

O

O

O

4

AUDIO OUt [R-AUDIO-L]

Connect RCA audio cables to AUDIO OUT [R-AUDIO-L] on the rear of your set and the other ends to

corresponding audio in connectors on the Amplifier or DVD Home Theatre.

5

ANt IN

To view television channels correctly, a signal must be received by the set from one of the following

sources:

An outdoor aerial / A cable television network / A satellite network

6

WISELINk

Connect a USB mass storage device to view movies and photos and listen to music files.

7

AV IN 

Connect RCA audio cables to [R-AUDIO-L] on your set and the other ends to corresponding audio out

connectors on the A/V device.

8

hEADPhONES JACk

Headphone may be connected to the headphone output on your set. While the head phone is

connected, the sound from the built-in speakers will be disabled.

9

S-VIDEO

Connect S-VIDEO cable to an appropriate external A/V device such as VCR, DVD or Camcorder.

Connect the audio cables to AV IN 2 [R-AUDIO-L].

0

COMPONENt IN 1,

Connect component video cables (optional) to component connector ("P

R

", "P

B

", "Y") on the rear of your

set and the other ends to corresponding component video out connectors on the DVD.

If you wish to connect both the Set-Top Box and DVD, you should connect the Set-Top Box to the DVD

and connect the DVD to component connector ("P

R

", "P

B

", "Y") on your set.

The P

R

, P

B

and Y connectors on your component devices (DVD) are sometimes labeled Y, B-Y and R-Y

or Y, Cb and Cr.

Connect RCA audio cables (optional) to [R - AUDIO - L] on the rear of your set and the other ends to

corresponding audio out connectors on the DVD.

!

LAN

Connect a LAN cable to this port to connect to the Network.

@

SERVICE

Connect this to the jack on the optional wall mount bracket. This will allow you to adjust the TV viewing

angle using your remote control.

#

kensington Lock (depending on the model)

The Kensington Lock (optional) is a device used to physically fix the system when used in a public

place.

If you want to use a locking device, contact the dealer where you purchased the TV.

The location of the kensington lock may be different depending on its model.

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

-

BN68-01780A.indb 5

2008-08-28 �� 6:38:07

Advertising