Samsung BN68-01780A-00 - Manual (Page 75)

English - 
Auto Wall-Mount (Sold separately) (depending on the model)
Once the auto wall mount is installed, your tV’s position can be easily adjusted.
Entering the menu
1. Press the ▲, ▼, ◄ or ► button on your remote control.
The Auto Wall-Mount screen is displayed.
If the Auto Wall-Mount screen is not displayed when
clicking on a direction button while watching your TV, use
the menu to display that screen.
• Press the MENU button to display the menu.
Press the ▲ or ▼ button to select “Setup”, then press the
ENtER button.
• Press the ▲ or ▼ button to select “Auto Wall-Mount”, then
press the ENtER button.
Remembering the Position
. Adjust to the desired position using the ▲,▼,◄,► buttons.
If you press an arrow button when no OSD is displayed on
the TV screen, the Adjustment screen appears.
Press the INFO button to reset. Press the ◄ or ► button to
select “Yes”, then press the ENtER button.
The position is initialized to the default setting.
. Press the blue button.
Press the ▲ and ▼ buttons to select a save mode from either
Position 1, Position 2 or Position 3 in order to save the current
position.
To not save the current position, press the REtURN button.
When selecting a save mode, you cannot use the Colour
buttons.
. Press the ENtER button to save.
When Position1 is selected, the message "Current position
saved as Position1" is displayed.
. Press the ENtER button.
The saved Position appears on the left side of the OSD.
➣
➣
➣
➣
➣
➣
➣
➣
tV Setup
Plug & Play 
Language : English 
time 
Cable Network Setup 
Light Effect : In Watching tV 
Auto Wall-Mount 
Melody : Off 
s More
Move Enter Return
Save
Select a mode to Save.
Position1
Position
Position
Move Enter Return
Auto Wall-Mount
Adjust Save Centre INFO
Position 1  
tV Rear Panel Auto Wall-Mount
SERVICE Cable (Not supplied)
TV
SET RESET
VCR DVD STB
BN68-01780A.indb 73 2008-08-28 �� 6:38:39