Setting up your remote control – Samsung BN68-01780A-00 User Manual

Page 71

Advertising
background image

English - 9

the teletext pages are organized according to six categories:

Part

Contents

A

b

C

D

E

F

Selected page number.

Broadcasting channel identity.

Current page number or search indications.

Date and time.

Text.

Status information.

FASTEXT information.

Teletext information is often divided between several pages

displayed in sequence, which can be accessed by:

 

Entering the page number

 

Selecting a title in a list

 

Selecting a coloured heading (FASTEXT system)

Press the

tV button to exit from the teletext display.

TV

SET

RESET

VCR

DVD

STB

Setting Up Your Remote Control

After the television has been set up properly, your remote control can operate in different modes: TV, VCR,

DVD, Set-Top Box, Cable Box. Pressing the corresponding button on the remote control allows you to

switch between these modes and control whichever piece of equipment you choose.

The remote control might not be compatible with all DVD Players, VCRs, Set-Top Boxes and Cable

Box.

Setting Up the Remote to Operate Your VCR, DVD, Stb and Cable box
1. Turn off your VCR, DVD, STB and Cable Box.
2. Press the MODE button and make sure that the VCR,

DVD and STB LED is illuminated.

3. Press the SEt button on your TV’s remote control.
4. Using the number buttons on your remote control,

enter three digits of the VCR, DVD, STB or Cable Box

code listed on pages 70~72 of this manual for your

brand of VCR, DVD, STB or Cable Box. Make sure you

enter three digits of the code, even if the first digit is a

“0”. (If more than one code is listed, try the first one.)

5. Press the POWER button on the remote control. Your

VCR, DVD, STB or Cable Box should turn on if your

remote is set up correctly. If your VCR, DVD, STB or

Cable Box does not turn on after set up, repeat steps

2, 3 and 4, but try one of the other codes listed for your

brand of VCR, DVD, STB or Cable Box. If no other

codes are listed, try each VCR, DVD, STB or Cable

Box code, 000 through 080.

When your remote control is in VCR, DVD or STB

mode, the volume buttons still control your TV’s

volume

TV

SET

RESET

VCR

DVD

STB

TV

SET

RESET

VCR

DVD

STB

BN68-01780A.indb 69

2008-08-28 �� 6:38:37

Advertising