Samsung SC-DX200 - Manual (Page 103)

English _ 89
• Time Lapse Recording mode is released once recording has been finished. To start another Time Lapse Recording, repeat
steps 1~7.
• A recording of 30 contiguous images comprises a video clip of 1 second length. Since the minimum length of a video to be
saved by your camcorder is one second, Interval defines how long the Time Lapse REC should be taken.
For example, if you set the interval to “30 Sec,” Time Lapse REC (time-lapse recording) should be taken for at least 15
minutes to record a minimum movie length of 1 second (30 images).
• Once the Time Lapse Recording finishes recording for its total recording time, it switches to the standby mode.
• Press the Recording start/stop button if you want to stop the Time Lapse Recording.
• The Time Lapse Recording does not support the sound input. (mute recording)
• When a video recording fills up 1.8GB of storage memory, a new recording file is automatically started at that point.
• When the battery is exhausted during Time Lapse Recording, it saves recording up to the point and switches to standby
mode. After a while, it displays a warning message of exhausted battery, and then turns off automatically.
• When memory runs out while performing Time Lapse Recording, the camcorder switches to the standby mode after saving
what was recording so far.
• We recommend using the AC power adaptor during the Time Lapse Recording.
Time Lapse Recording records image frames at the
predefined interval over the total recording time to
produce a time-lapse video.
Time Lapse Recording is useful in the following cases;
• Blooming flowers
• Insect’s skin-casting
• Clouds rolling by in the sky
Example of Time Lapse Recording
Time for recording on
the storage media (a
video clip of Time Lapse
Recording)
Total time for recording
Recording interval
Timeline
0:00:09/0:16:00
100-0002
0:02:00/0:16:00
100-0002
0:05:00/0:16:00
100-0002
0:09:00/0:16:00
100-0002
0:14:00/0:16:00
100-0002