Samsung SC-DX200 - Manual (Page 51)

English _ 37
6. Make sure the clock is correctly set, then press the Joystick.
• The clock starts.
• On charging the built-in rechargeable battery
The built-in rechargeable battery is automatically charged while the camcorder is turned on and connected
to the AC Power Adapter. Use your camcorder after charging the built-in rechargeable battery. If the built-in
rechargeable battery is not charged, any inputted data will not be backed up and the date/time appears on
the screen as “JAN/01/2009 12:00 AM” (when “Date/Time Display” function is activated).
• After setting, the date and time are automatically recorded on a special data area of the storage media.
Turning the date and time display on/off
To switch the date and time display on or off, access the menu and change the date/time mode. page 94
Simple setting of the clock by time difference
You can easily set the clock to the local time by setting a time difference when using your camcorder
abroad. Select “Time Zone” on the menu, then set the time difference. pages 92~93
Selecting the OSD language
You can select the desired language to display the menu screen and the messages.
1. Press the MENU button.
• The menu will appear.
2. Move the Joystick right or left to select “Settings.”
• The settings menu screen appears.
• Refer to “To use Settings menus” for accessing to “Settings” mode. page 71
3. Move the Joystick up or down to select “Language,” and then press the Joystick.
4. Move the Joystick up or down to select the desired language, and then press the Joystick.
5. To exit, press the MENU button.
• Even if the battery pack or AC power were removed, the language setting would still
be preserved.
• “Language” options may be changed without prior notice.
STBY 0:00:00[30 Min]
Settings
: TV Display
Default Set
Language
Exit Select
STBY 0:00:00[30 Min]
Settings
:
: 20% TV Display
Default Set
Language
Exit Move Select
English
Français