Socket Mobile Secure Digital Scan Card Series 3 - Manual (Page 12)

STEP 4: Assign a Trigger Button
Refer to your device’s user documentation to assign a trigger
button.
If you do not want to assign a hardware button to
trigger the scanner, you can install Socket’s Floating
Trigger, available on the installation CD.
If SocketScan is not running yet, you can press the
assigned trigger button to quickly launch SocketScan.
Pressing the trigger button will activate the scanner
only when SocketScan is open.
1. Tap Start | Settings | Buttons.
2. From the Button list, tap to select a button to trigger the
SD Scan Card. In the drop-down menu, select SocketScan.
When done, tap ok.
For maximum ergonomics,
choose a button located
directly beneath your thumb or
forefinger when you hold the
device. For the SoMo 650
handheld computer, the Right
and Left side buttons are
recommended.
12