Socket Mobile Secure Digital Scan Card Series 3 - Manual (Page 27)

• Launch App: Check if you want SocketScan to launch an
application when you start to scan. In the drop-down
menu, select the application.
Do not choose Blazer as the auto-launch application.
4. Tap OK to make the settings take effect.
STEP 6: Open Your Application
If you did not assign SocketScan to launch an application, then
you need to manually start the application that you want
SocketScan to feed scanned data into (e.g., SheetToGo).
1. Open the application.
2. Make sure a new document or spreadsheet is open.
3. Place the cursor where you want information from the next
scan to go.
CHAPTER 3: SETUP FOR PALM 27