Socket Mobile Secure Digital Scan Card Series 3 - Manual (Page 24)

STEP 3: Insert the Card
Insert the card into your Palm device’s SDIO slot. Make sure the
card is positioned correctly. Do not force or shove the card in too
hard.
Older Palm m100 & m500 series devices: The SDIO slot is
reversed, so the scanner must be inserted backwards.
To remove the SD Scan Card, push the card completely
into the slot. After the card springs back, gently remove
the card. Do not pull the card out without pushing first,
or you may damage the connector the next time you
insert a card
Make sure you have soft reset your device after
software installation before you insert the card. Press
the reset button.
STEP 4: Start SocketScan
1. Start SocketScan. Tap on the Home icon.
2. In the menu in the upper right corner, select All.
3. Scroll to the SocketScan icon. Tap on the icon.
24