Socket Mobile Secure Digital Scan Card Series 3 - Manual (Page 28)

STEP 7: Scan Data into Your Application
1. Press the assigned trigger button and scan the bar code. Make
sure the aiming beam covers the entire width of the bar code.
For scanning tips, please refer to Appendix E.
2. When data is read, your device will make a sound if you
configured SocketScan to do so, the scanner will turn off, and
data will appear in your application.
For example, after you scan the bar code above into a new
spreadsheet, data should appear on the first line.
If no data is read within a few seconds, the scanner will turn
off, and you must try again.
28