Samsung IPOLIS SNP-3300 - Manual (Page 100)

30X PTZ Network Camera SNP-3300
96
Problem Solution
The MOTION
DETECTION function is
not working. ƒ Please check if 'MOTION
DETECTION' mode is turned on.
ƒ Please check if the MD LEVEL is too
low.
ƒ Please check the setting of the MD
AREA.
When camera cannot
be controlled for Pan/
Tilt/ Zoom ƒ Inspect the cables(power or network)
connected to the device.
ƒ Connect to Admin page to check
whether user control is selected.
Colors are not quite
right. ƒ Please check the 'WHITE BAL'
setting.
The screen is
flickering. ƒ Please check if the camera is facing
directly into sunlight or fluorescent
light.
L/L mode isn't able to
be selected. ƒ Please check the frequency of power
supply (60Hz for NTSC, 50Hz for
PAL).
DAYNIGHT(Auto) mode
is not working. ƒ Please check if the AGC menu is set
to the OFF position.
SENS-UP function is
not working. ƒ Please check if the AGC menu is set
to the OFF position.
ƒ Please check if the SHUTTER menu
is set to MANUAL mode.
ƒ Please check the limit of SENS-UP
AUTO mode.