Siemens SIMATIC S7-300 - Manual (Page 13)

9
SIMATIC S7-300 Getting Started for First Time Users
Getting Started, 04/2007, 6ZB5310-0NC02-0BA0
Installing STEP 7 Lite
In order to create the control program for the drive motor on your PC, you must
install the STEP 7 Lite software. The latest version of STEP 7 Lite including ser-
vice pack can be found on the Internet at:
http://support.automation.siemens.com/WW/view/en/24372175
• Open the installation file and follow the instructions.
Installing the driver for the PC Adapter USB
Use the PC Adapter USB to establish the connection between the CPU 312C
and the PC. The PC Adapter USB connects the USB interface of the PC with the
MPI interface of the CPU 312C, thus enabling communication. In order to use
the PC Adapter USB, you must install the necessary driver.
• Insert the Driver CD for the PC Adaptor USB and follow the instructions.
Note
If the CD does not start up
automatically, you can start
the setup program by double-
clicking the Setup.exe file in
the main directory of the CD.