Siemens SIMATIC S7-300 - Manual (Page 8)

1 Welcome
4
SIMATIC S7-300 Getting Started for First Time Users
Getting Started, 04/2007, 6ZB5310-0NC02-0BA0
Validity
These instructions apply to the following CPUs:
Prerequisites
You are proficient in working with the Microsoft ® Windows TM operating system.
You are familiar with the basics of electronics and electrical engineering.
Abbreviation Order no.
You will need a micro
memory card (MMC)
for operation
As of firmware
version
312C 6ES7312-5BE03-0AB0 X V 2.6
Warning
Dangerous currents and voltages!
Serious bodily injury and damage to machinery and equipment can occur if
you do not observe the safety and accident prevention regulations, e.g.,
IEC 204 (emergency STOP devices).
Operation of an S7-300 in plants or systems is governed by special rules
and regulations, depending on the specific field of application.