Siemens SIMATIC S7-300 - Manual (Page 38)

4 Configuring
the control in
STEP 7 Lite
34
SIMATIC S7-300 Getting Started for First Time Users
Getting Started, 04/2007, 6ZB5310-0NC02-0BA0
4.2 Opening a STEP 7 Lite project
In order to configure the control in STEP 7 Lite, you must open the example
project provided and familiarize yourself with the program interface.
Opening the “conveyor” project
1. Start STEP 7 Lite.
2. Insert the CD with the example project, and open the example project:
conveyor.k7p