Cleaning and maintenance – Smeg 129530 User Manual

Page 16

Advertising
background image

129530

• After every drying clean the fi lter, located in the inner part of

the door.

• Lift the fi lter lid (Fig.).
• Pull your fi ngers over the fi lter to remove fi bers and threads

lining. Replace the fi lter cover.

• If necessary, also clean the fi lter housing and door sealing.

Cleaning of the fi lter on the lower side of the door opening
(only with some models)
Before removing clothes from the drum, clean the fi lter on the
lower side of the door opening with a damp cloth or wet hand.

If the fi lter is clogged in such way that it needs washing, pull it
out from its bed (Fig.), wash it under hot water and dry. Be sure
that the replaced fi lter snaps safely to its position, and only then
close the fi lter lid.

If the fi lter is not regularly cleaned, the airfl ow is

obstructed, which causes longer drying time and
danger of overheating.

Empty the container and occasionally clean the water

condensation device.

Emptying the water containere
Empty the container after every drying procedure: pull the
container out, pull out the draining nozzle, pour out the water and
replace the container.

Water from condenser tank is not drinkable! If fi ltered it

may be used for ironing.

Strictly switch the appliance off prior cleaning (unplug

the power cord from the wall socket, or turn the
program selector jog to the position “0”).

• Clean the casing and drum interior with soft cloth and mild

detergent.

Cleaning the water condensation device
Clean water condenser two to three times a year. In case of
frequent use of the appliance do it even more often. Certain

Cleaning the fi lter

Cleaning the fi lter

Cleaning the
condensation dryer

Cleaning the
condensation dryer

16

Cleaning and maintenance

Advertising