Troubles – Smeg 129530 User Manual

Page 18

Advertising
background image

129530

In case of F0, F1, F2, F3, F4 failures, contact your

service technician without hesitation.

Interferences from the ambient (for example electrical wiring) could induce signalization of different
faults. In such cases:
- switch the appliance off, and wait for a few seconds;
- plug in the appliance and repeat the drying program.
If the fault repeats, call authorized service shop.

Warranty shall not apply in case of failures due to interferences from the environment (lightning
stroke, power supply circuit faults, natural disasters).

18

Troubles

Trouble

Check

Appliance does not work:

• If there is current in the socket and if the fuse is functioning.
• If the plug is correctly inserted into the socket.

There is current in the
socket, but the drum is not
rolling:

• If the door is closed tightly (press it towards the appliance).
• If the program runs according to instructions.
• If the container is full (only with condensation dryer).
• If appropriate drying time is selected.

Laundry is not dry:

• If the fi lter is clean.
• If the condensation device is clean (only with condensation

dryer).

• If the room is adequately ventilated.
• If the amount of laundry to be dried is not too big.
• If the evacuation tube is too long (only with evacuation dryer

- max 2 m).

• If the laundry loaded in the drum has not been spun enough or

if appropriate drying time has been set.

• If the room is too hot (over 25°C, applies for condensation

dryer).

The condensation is
inadequate:

• If the room temperature is too high.
• If the condensation device is clean.

Unevenly dried laundry:

• If the amount of laundry to be dried is not too big.
• If there are only large pieces of laundry (large and small pieces

should be dried together).

• If different fabrics are dried together (group the laundry

according to the type of fabrics).

In case of certain functional failures the appliance signals it with a beep and relevant reading is
fl ashing on the display.

If a failure occurs due to incorrect installation or inappropriate use of the appliance, the guarantee
is void, and the repair bill is charged to the user.

Advertising