Smeg 129530 - Manual (Page 5)

129530
The belt can be replaced by a servising engineer only, who incorporates an original
spare part with the marking OPTIBELT EPH 1906, code 104265, OPTIBELT 8 EPH 1941,
code 160165 (depending on model).
The symbol on the product or on its packaging indicates that this product may not
be treated as household waste. Instead it shall be handed over to the applicable
collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential
negative consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of thisproduct. For more
detailed information about recycling of this product, please contact your local city
offi ce, your household waste disposal service or the shop where you purchased the
product.
Never stop a tumble dryer before the end of the drying cycle unless all items are
quickly removed and spread out so that the heat is dissipated.
• Packaging materials are environmentally friendly: they can
either be recycled, safely disposed of or destroyed without any
threat to the environment.
• To be able to do this effectively all materials are marked
accordingly.
Be careful not to damage cabinet of the appliance with
a sharp object when removing the packaging.
Before connecting the appliance, let it warm up to room
temperature (wait for two hours).
Ventilation slots and openings on the appliance front and rear
wall should not be obstructed.
A - Evacuation dryer
• Place the appliance in a well ventilated room with a window or
a built-in fan.
• Connect the evacuation tube to the pre-prepared opening.
• Evacuation must not be connected to air duct used as
a chimney for exhaust gasses of appliances using other
combustion material.
B - Condenser dryer
• Do not place the appliance in a room where there is danger of
freezing.
• Location should be adequately ventilated. Room temperature
should always be between 0°C and 25°C since frozen water
in the condensation water receptacle or in the pump may
damage the dryer.
Removing wrapping Removing wrapping
Selecting the appropriate
location of the appliance Selecting the appropriate
location of the appliance
5
Installation and connection