Charging the battery, Charging procedure, Charging time – Siemens SF65 User Manual

Page 11

Advertising
background image

©

Sieme

ns

AG

2003, \\Itl

-eu\wien\P

rojekte_2

0\Sie

m

ens\SF65\output

\sug

\en\ohne_

SAR\S_Electra

_Startup.fm

left page (10)

of SF65 SUG en, A31008-H7360-A1-1-7619 (12.10.2004, 16:54)

Getting started

10

VAR Langua

ge: en; V

A

R issue

date: 040929

• To remove the battery, press the

inner clips one after another and

lift the battery from the right edge

of the phone.

• To replace the back cover, hook

the clips onto the hinges on the

bottom of the phone

7

and press

the cover down

8

until the latch

catches.

Charging the battery

Charging procedure

The battery is not fully charged

when delivered. Plug the charger

cable into the bottom of the phone

9

, plug the power supply unit into a

mains power socket and charge for

at least two hours.

Charging time

A flat battery is fully charged after

about 3 hours. Charging is only possi-

ble within a temperature range of

0 °C to 45 °C. If the temperature ris-

es/falls 5°C above/below this, the

charge symbol flashes a warning.

The mains voltage specified on the

power supply unit must not be

exceeded.

Additional information
Please switch off your phone before re-

moving the battery!
Only 3-V SIM cards are supported. Please

contact your service provider if you have an

older card.

Advertising