Care and maintenance, Battery quality declaration, Display quality declaration – Siemens SF65 User Manual

Page 57: Battery quality declaration, Display quality declaration

Advertising
background image

©

Sieme

ns

AG

2003, \\Itl

-eu\wien\Projek

te_2

0\Sie

m

ens\SF65\output

\sug\en\ohne

_S

AR\S_Electra

_Mainte

nanc

e_

Akku.fm

left page (56)

of SF65 SUG en, A31008-H7360-A1-1-7619 (12.10.2004, 16:51)

Care and maintenance

56

VAR Langua

ge: en; V

A

R issue

date: 040929

Care and maintenance

Your phone has been designed and manu-

factured to the highest of standards and

should be treated with great care. The sug-

gestions below will help you enjoy your

phone for many years.

• Protect your phone from moisture and hu-

midity! Precipitation, humidity and liquids

contain minerals that will corrode electron-

ic circuits. Should your phone nonetheless

become wet, disconnect it immediately

from any power supply, remove the battery

and leave the open phone to dry at room

temperature!

• Do not use or store the phone in dusty,

dirty areas. Its moving parts may become

damaged.

• Do not store your phone in hot areas. High

temperatures can shorten the life of elec-

tronic devices, damage batteries and warp

or melt certain plastics.

• Do not store your phone in cold areas.

When the phone warms up again (to its

normal ambient temperature), moisture

can form inside the phone, which may

damage electronic circuit boards.

• Do not drop, knock or shake your phone.

Rough handling can damage internal cir-

cuit boards!

• Do not use harsh chemicals, cleaning sol-

vents, or strong detergents to clean the

phone!

The suggestions given above apply equally

to your phone, battery, charger and all ac-

cessories. If any of these parts are not work-

ing properly, take them to your nearest

qualified service outlet. The personnel there

will assist you and, if necessary, repair the

device.

Battery quality

declaration

The capacity of your mobile phone battery

will reduce each time it is charged/dis-

charged. Storing the battery at temperatures

that are too high or too low also causes a

gradual loss of capacity. As a result the oper-

ating time of your mobile phone may be con-

siderably reduced, even after the battery has

been fully charged.
The battery is, however, designed to be ca-

pable of being charged and discharged for a

period of six months from the date when the

phone was purchased. Following this six-

month period, we recommend replacing your

battery if you experience a significant drop in

performance. Please buy only Siemens orig-

inal batteries.

Display quality

declaration

For technological reasons, a few small dots

with different colours may appear in the dis-

play in exceptional cases.
Please note that the appearance of brighter

or darker dots generally does not mean that

a fault has occurred.

Advertising