Sony STR-DE895 - Manual (Page 26)

26
GB
STR-DE995/895 4-244-963-11(1)GB
MULTI CH IN/DIRECT
Press MULTI CH IN/DIRECT to enjoy the
audio source connected to the MULTI CH IN 1
or 2 jacks or analog 2 channel input jacks. Only
volume control and the front speaker balance
can be adjusted when set to ANALOG
DIRECT. When set to MULTI 1 or 2 DIRECT,
you can adjust balance and level of all the
speakers. When this function is on, the
surround effects are turned off.
Select To
MULTI 1 or 2 Enjoy the audio source
DIRECT connected to the MULTI CH
IN 1 or 2 jacks. MULTI CH
IN 1 or 2 indicator lights
up in the display. This mode
is suitable for enjoying high
quality analog source.
ANALOG DIRECT Enjoy the audio source
connected to analog 2
channel jacks. This mode is
suitable for enjoying high
quality analog source.
MULTI CHANNEL DECODING
indicator
This indicator lights up when the unit is
decoding signals recorded in a multi channel
format.
MUTING
Press MUTING on the remote to mute the
sound. Press again to cancel the muting
function. The muting function is also canceled
when you turn the power on or turn the
MASTER VOLUME to turn the volume up.
PHONES
Use to connect headphones.
• When the headphones are connected, speaker
output is automatically canceled and “SP.A”
and “SP.B” do not light up in the display.
• When the headphones are connected, selectable
sound fields are HP (2CH), HP (DIRECT), HP
(MULTI 1 or 2) and HP (THEATER) (page
31).
Note
When “HP (MULTI 1 or 2)” appears in the display
while the headphones are connected, only the L/R
signals of the multi channels are output from the
headphones.
SPEAKERS (OFF/A/B/A+B)
Press SPEAKERS (OFF/A/B/A+B) to output
the sound from the speakers connected to the
SPEAKERS FRONT terminals.
Each time you press the button, the display will
light up cyclically as follows:
SP.A t SP.B t SP.A and SP.B t
No display*
To drive Select
Speaker System A SP.A (default setting)
(Connected to the
SPEAKERS FRONT A
terminals)
Speaker System B SP.B
(Connected to the
SPEAKERS FRONT B
terminals)
Both Speaker System A SP.A and SP.B
and B (Connected to the
SPEAKERS FRONT A
and B terminals)
* If you do not want to drive Speaker System A
and B, press SPEAKERS (OFF/A/B/A+B) until
“SP.A” and “SP.B” do not light up in the display
(no display).
Selecting the component (continued)