Sony STR-DE895 User Manual

Page 56

Advertising
background image

56

GB

STR-DE995/895

4-244-963-11(1)GB

Tip

If programming is unsuccessful, check the following:

– If the indicator does not light up in step 1, the

batteries are weak. Replace both batteries.

– If the indicator lights 4 times in quick

succession in step 3, an error has occurred. Start
again from step 1.

To cancel programming

Press USE MODE during any step. The remote
automatically exits the macro setting mode.

To delay the output of an IR code

Start over from step 1. In step 3,

• Press M1 (TV/SAT) when the macro setting

is M1.

• Press M2 (TAPE) when the macro setting is

M2.

1 second delay is programmed at this program
step. The indicator lights twice slowly, then the
remote automatically exits the macro setting
mode.

To clear the programmed IR codes

Clear each macro step individually. In step 3,

• Press M1 (TV/SAT) when the macro setting

is M1.

• Press M2 (TAPE) when the macro setting is

M2.

The IR code is cleared. The indicator lights
twice slowly, then the remote automatically
exits the macro setting mode.

To start macro play

Press M1 (TV/SAT) or M2 (TAPE) while the
ALT indicator turns ON.

Note

If the Macro Play function does not work properly,
program a delay between each operation. See “To
delay the output of an IR code”.

Performing several commands in sequence
automatically (Macro Play) (continued)

Advertising
This manual is related to the following products: