Sony STR-DE895 - Manual (Page 64)

64
GB
STR-DE995/895 4-244-963-12(1)GB
To control a TV
Maker Code(s)
SONY 501, 502
DAEWOO 515, 544
FISHER 508
GOLDSTAR 503, 515, 534, 544
GRUNDIG 534
HITACHI 515, 544
JVC 516
MAGNAVOX 503, 518, 544
MITSUBISHI/MGA 503, 544
NEC 503, 544
PANASONIC 509, 524
PHILIPS 515, 518
PIONEER 509, 525, 526, 540
RCA/PROSCAN 510, 527, 528, 529, 544
SAMSUNG 503, 515, 531, 532, 533,
534, 544
SANYO 508, 545, 546, 547
SHARP 535
TOSHIBA 535, 540
ZENITH 542, 543
To control a satellite tuner or cable
box
Maker Code(s)
SONY 801, 802, 803, 804
JERROLD/G.I. 806, 807, 808, 809, 810,
811, 812, 813, 814
PANASONIC 818
RCA 805, 819
S. ATLANTA 815, 816, 817
Learning the commands
of your components
By using the Learning function, it is possible
for this remote to perform learned commands.
Setting remote control codes that
are not stored in the remote
When a remote control code is not one of the
presets stored in the remote, it is possible for
the remote to learn the code using the Learning
function.
1
Press TV ?/1 while pressing down USE
MODE.
The indicator lights and LEARN appears in
the display.
2
Push the scroll key/PUSH towards v or
V to select the input selector (including
TV ?/1) for the component you want to
control.
For example, if you are going to learn an
operation for a CD player, select CD/
SACD.
3
Press PUSH.
4
Press the button you want to use for
the Learning function.
The indicator turns off while a valid button
is pressed, then blinks slowly.
5
Point the remote control code receiver
section of the remote towards the
receiver/transmitter on the remote
control to be learned.
5-10 cm
H
X
m
M
.
>
-
x
P
L
O
f F
G
g v V PUSH
Programming the remote (continued)