Changing the exposure and original image type, Place the originals, Select settings in the touch panel – Sharp DX-C401 User Manual
Page 106: 5) touch the [ok] key, The side to be scanned must be face up
104
CHANGING THE EXPOSURE AND
ORIGINAL IMAGE TYPE
Exposure and original image type settings can be selected as appropriate
for the original.
The procedure for darkening the exposure and setting the original image
type to "Text/Prtd. Photo" is explained below.
1
Place the originals.
When using the document glass,
place the original with the side to be
scanned face down.
2
Select settings in the touch
panel.
(1) Touch the [Exposure] key.
(2) Read the displayed
message and touch the
[OK] key.
(3) Touch the [Text/Prtd.
Photo] key.
(4) Darken light colors with the
key.
5 levels are available for the
exposure. Darken light originals
with the
key, and lighten
dark originals with the
key.
(5) Touch the [OK] key.
The side to be scanned must be face up!
When Fax/I-Fax address is included,
exposure setting shared is selected,
and Original Image Type is disabled.
Auto
Auto
File
Quick File
Address Review
Send Settings
Address Entry
Address Book
USB Mem. Scan
Fax
Internet Fax
PC Scan
Special Modes
Color Mode
File Format
Resolution
Exposure
Original
Scan:
Scan
Send:
200X200dpi
Auto/Grayscale
Mono2
Moiré Reduction
Scan/Exposure
OK
Original Image Type
Text/
Prtd.Photo
Text/Photo
Photo
Printed
Photo
Text
Map
Auto
Manual
3
1
5
8½x11
OK
(1)
(2)
(5)
(4)
(3)
mxc401_us_qck.book 104 ページ ２００８年１０月１６日 木曜日 午前１０時５１分