Sharp DX-C401 - Manual (Page 19)

17
USER AUTHENTICATION
When user authentication is enabled in the system settings, you must log in
before using the machine. User authentication is initially disabled.
When you have finished using the machine, log out.
User authentication methods
There are two methods for performing user authentication: login by user
number and login by login name and password. Ask the administrator of the
machine for the information that is required to log in.
For details on user authentication, see "USER AUTHENTICATION" in
"Chapter 1 - BEFORE USING THE MACHINE" in the Operation Guide.
Login by user number
Login by login name and password
This method requires that you log
in by entering your user number (5
to 8 digits), which is stored in the
system settings of the machine.
This method requires that you log
in by entering your login name,
password, and the login
destination, which are stored in the
system settings of the machine.
Depending on how the machine
administrator has configured the
system settings, an e-mail address
may also be used for
authentication.
User Authentication OK
Admin Login
User Authentication OK
Login Name
User Name
Password
Auth to: Login Locally
mxc401_us_qck.book 17 ページ ２００８年１０月１６日 木曜日 午前１０時５１分