Sharp DX-C401 - Manual (Page 79)

77
(8) [Resend] key / [Next Address]
key
The destinations of the most recent
eight transmissions by Scan to
E-mail, fax and/or Internet fax
(including Direct SMTP addresses)
are stored. To select one of these
destinations, touch the desired
destination. After a destination is
selected, this key changes to the
[Next Address] key.
(9) Image settings
Image settings (original size,
exposure, resolution) can be
selected.
(10) key
This key appears when a special
mode or 2-sided scanning is
selected. Touch the key to display
the selected special modes.
(11) [Special Modes] key
Touch this key to use a special
mode.
(12) key / key / key
When "Hold Setting for Received
Data Print" or "Received Data
Image Check Setting" is enabled in
the system settings (administrator),
this will appear when a fax is
received.
: Only "Hold Setting for
Received Data Print" is
enabled
: Only "Received Data Image
Check Setting" is enabled
: Both settings are enabled
(13) This shows the currently
selected fax reception mode and
the amount of free memory
remaining.
mxc401_us_qck.book 77 ページ ２００８年１０月１６日 木曜日 午前１０時５１分