Sony ShowView SLV-SE510B - Manual (Page 14)

14 Connecting the VCR
Master Page : Left
filename[010get.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
If your TV has a PERITEL connector
Note
• If the TV is connected to the LIGNE-1 (TV) connector, setting the RF channel to
OFF is recommended. In the OFF position, only the signal from the aerial is
output through the ANTENNE SORTIE connector (see page 19).
1 Disconnect the aerial cable from
your TV and connect it to
ANTENNE ENTREE on the rear
panel of the VCR.
2 Connect ANTENNE SORTIE of
the VCR and the aerial input of
your TV using the supplied aerial
cable.
3 Connect LIGNE-1 (TV) on the
VCR and the PERITEL connector
on the TV with the optional
PERITEL cable.
This connection improves picture
and sound quality. Whenever you
want to watch the VCR picture,
press t TV/MAGN to display
the MAGN indicator in the display
window.
4 Connect the mains lead to the mains.
Mains lead
i LIGNE-1
(TV)
ANTENNE
ENTREE
PERITEL
to mains
Aerial cable (supplied)
ANTENNE
SORTIE
: Signal flow
PERITEL cable (not supplied)
ANTENNE ENTREE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE
AERIAL
ANTENNE
IN
ENTREE
OUT
SORTIE