Sony ShowView SLV-SE510B - Manual (Page 50)

50 Recording TV programmes using the ShowView system
Master Page : Left
filename[010bas.fm] model name1[SLV-SE510B] [3-065-671-E1 (1) GB]
Recording TV programmes using the
ShowView system
The ShowView system is the feature that simplifies programming the VCR to make
timer recordings. Just enter the ShowView number listed in the TV programme guide.
The date, times, and programme position of that programme are set automatically.
You can preset a total of eight programmes, including settings made with other timer
methods.
Before you start …
• Check that the VCR clock is set to the correct time and date.
• Insert a tape with its safety tab in place. Make sure the tape is longer than the total recording
time.
• To record from a decoder, turn it on.
• Turn on your TV and set it to the video channel.
• Set OPTIONS PROGRAMM. to SHOWVIEW or MIXTE in the OPTIONS-2 menu (see
page 70).
• Refer to “Index to parts and controls” for button locations.
1 Press MINUTERIE.
• When you set OPTIONS
PROGRAMM. to MIXTE:
The METHODE DE
PROGRAMMATION menu
appears on the TV screen. Press
M/m to select SHOWVIEW, then
press OK.
• When you set OPTIONS
PROGRAMM. to SHOWVIEW:
The SHOWVIEW menu appears
on the TV screen.
2 Press the programme number buttons
to enter the ShowView number.
If you make a mistake, press
ANNUL/0 and re-enter the correct
number.
MINUTERIE
OK
LECTURE
REGLER :
SELECTIONNER :
OK
MENU :
METHODE DE PROGRAMMATION
NORMALE
SHOWVIEW
SORTIE
MENU :
SHOWVIEW
REGLER
–
: 0–9
N ° SHOWVIEW
– – – – – – – –
VEN 2 8 . 9
SORTIE
1 2 3
4 5 6
7 8 9
0
ANNUL/0
MENU :
SHOWVIEW
REGLER
N ° SHOWVIEW
– 1 2 4 6 – – – –
VEN 2 8 . 9
SORTIE
ANNULER
: 0–9
:
OK : CONFIRMER
ANNUL / 0