Sony DSR-1800AP - Manual (Page 38)

38
Playback
C
h
apt
er 2
Rec
o
rding
a
nd Pla
y
b
a
c
k
Playback Procedure
Note
When controlling this unit from an editing control unit connected to the
REMOTE connector (see page 25) of this unit, press the REMOTE button
turning it on. When not, turn off the button.
1
Insert a cassette.
For details of cassette insertion see page 29, and for usable cassette types
see page 27.
The cassette is automatically drawn into the unit. The STOP button will
light, and a few seconds later a still image will appear on the monitor screen.
2
Press the PLAY button.
This starts the playback operation. When the tape is played back all the way
to the end, the unit automatically rewinds it and then stops.
If the following indicators light when a cassette is loaded
To perform the following operations
Indicator It means:
Cassette memory indicator The loaded cassette contains a cassette memory.
ClipLink indicator There is ClipLink log data stored in the cassette
memory on the loaded cassette.
NOT EDITABLE indicator The tape was recorded in the DV format, or a
DVCPRO tape is inserted.
You cannot use it as a recording tape for editing.
Operation Do this:
Stop playback. Press the STOP button.
The unit enters stop mode, and will automatically
switch to standby off mode after the time set with the
STOP TIMER menu item
(see page 68).
Adjust the audio playback
level. Use the audio level control on the monitor.
2
1
INPUT
VIDEO
AUDIO
V:SDTI SDTI i.LINK dB 0
-12 -20
-30
-40
-60
dB 0 1 0
-1 -2
OVER
1
dB 0
-12 -20
-30
-40
-60
dB 0 1 0
-1 -2
OVER
2
dB 0
-12 -20
-30
-40
-60
dB 0 1 0
-1 -2
OVER
3
dB 0
-12 -20
-30
-40
-60
dB 0 1 0
-1 -2
OVER
4 REC MODE
CH11/2
CH23/4
COMPOSITE
2CH4CH PB FS
Y-R,B
48k44.1k32k
S VIDEO SDI SG
ANALOG AES/EBU SDI SG
ANALOG AES/EBU SDI SG
REMOTE button