Sony DSR-1800AP - Manual (Page 44)

44
Playback
C
h
apt
er 2
Rec
o
rding
a
nd Pla
y
b
a
c
k
8
Press the KA button.
The display changes as follows.
9
Press the j button to select “A PRESET.”
10
Press the B k button.
The A PRESET MODE screen appears. The time code value of the current
point A is displayed below the screen title.
11
Use the KA or Bk button to select the digit in the time code value
display that you want to change.
Each press of the button causes the digit to the left or right to begin flashing.
Holding the button down moves the flashing digit continuously.
If you want to clear the time code value, press the RESET (NO) button. The
value is cleared to 00:00:00:00, and the leftmost digit begins flashing.
>> REP TOP SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
.
A
:V.END
Monitor screen
Time counter display
>> A preset SETUP MENU
OPERATIONAL FUNCTION
REPEAT FUNCTION
REPEAT MODE
REPEAT TOP
REPEAT END
A PRESET
B PRESET
:OFF
.
A
:V.END
Monitor screen
Time counter display
A PRESET MODE
A 00:00:00:00
INC/DEC : ( )( )KEY
SHIFT : ( )( )KEY
CLEAR : RESET KEY
DATA SAVE : SET KEY
TO MENU : MENU KEY
Monitor screen