Skylink TOTAL PROTECTION ALARM SYSTEM SC-10 - Manual (Page 4)

All materials required for installation are included in this package:
One Audio Alarm (AA-433) - includes
1 antenna (installed)
1 AC adapter
1 9 volt alkaline battery
Two sets of Door/Window Sensors (WT-433)
each set includes:
1 transmitter
1 magnetic switch
(attached to the transmitter)
1 magnet
2 spacers
1 12 volt alkaline battery (installed)
Two Keychain Transmitters (4B-434) each includes:
1 12 volt alkaline battery (installed)
Two packs of screws and anchors
(for the Audio Alarm and the Door/Window Sensors)
One template (to aid in the installation of the Door/Window Sensors and
Audio Alarm)
Double Sided Tape (to help in the installation of the Audio Alarm and Door/
Window Sensors)
Warning Stickers 2 pcs
Manual
Warranty Card
– 4 – – 17 –
PACKAGE CONTENTS
ADDITIONAL ACCESSORIES
Additional sensors and transmitters as well as add on accessories are avail-
able to work with your security system.
Motion Sensor (PS-434A)
- Monitors area in a 110 degree ARC and up to
40 feet away from the sensor
- 9V alkaline battery included
Door/Window Sensor (WT-433)
- Attaches to all doors, windows, entrances
- Add on as many magnetic switch (MS-001) as
needed
- 12V alkaline battery included
Magnetic Switch/Magnet (MS-001)
- Used in conjunction with Door/Window Sensor
(WT-433)
- Add on for additional doors, windows
Keychain Transmitter (4B-434)
- Activates Audio Alarm (AA-433) instantly
by pressing panic button
- Reliable design, crystal base transmission with
microcontroller
- 12V alkaline battery included
Emergency Dialer (AD-433S)
- When the alarm is activated, the Emergency
Dialer automatically sends a preprogrammed
voice message to as many as nine different
phone numbers
- If any numbers are busy or there is no answer,
the Emergency Dialer will go back and redial each
number nine times or until there is an answer
- No need to pay monitoring fees
- Ideal for home, small business
- Operates by AC adapter with battery back up