Sharp Aquos LC 45GD4U - Manual (Page 16)

15
Part names
Display
* Press RESET if the system cannot return to its
original state after performing various operations.
• AV MODE resets to DYNAMIC (Fixed)
• TV channel returns to initial channel (Air:2ch, Cable:1 or 2ch)
• Twin picture resets to normal
• Audio setting initializes
• Dolby virtual resets to off
• Image position initializes
** Press SYSTEM RESET if the TV does not operate after starting up.
NOTE
• Pressing RESET will not work if the TV is in standby mode.
• Pressing RESET will not delete channel preset or secret number. See page 79 for clearing the secret number when you
know it. See page 99 for initializing to the factory preset values when you forget your secret number.
RESET*
INPUT 3
terminals
SYSTEM RESET**
ANALOG A IN terminal
ANALOG B IN terminal
ANALOG A OUT terminal
DC OUTPUT terminal
(Terminal for expanded functionality in the
near future.)
EXTERNAL
SPEAKER terminals
AC INPUT
terminal
RS-232C
terminal
INPUT 2 terminals
INPUT 1
terminals
INPUT 5
terminals INPUT 4 terminal
DIGITAL
AUDIO
OUTPUT
terminal
CENTER
CHANNEL
INPUT
terminal
MONITOR OUTPUT
terminals
i.LINK
terminals CableCARD
slot
DIGITAL IN
terminal