Sharp Aquos LC 45GD4U - Manual (Page 21)

20
Display
Turning on/off the power
POWER
Display status indicator
POWER indicator
1
2
Plug in the AC cord of the TV. (See page 10.)
• The TV enters standby mode or turns on depending on its
status at the time the power was shut down.
When the TV is standby mode: Press POWER on
the Display or TV POWER on the remote control to
turn on the power.
• To go to standby mode when the TV is on, press POWER on
the Display or TV POWER on the remote control.
• To turn off the power completely, remove the AC cord from the
power outlet when the TV is in standby mode.
NOTE
• The initial setup starts when the TV powers on for the first time. If the TV
has been turned on before, the EZ setup will not be invoked. See page
28 to try EZ setup from the Setup menu.
• If you are not going to use this TV for a long period of time, be sure to
remove the AC cord from the power outlet.
Watching TV
ON
w/o CableCARD
When CableCARD
inserted
Standby
OFF (Standby)
CableCARD is downloading data.
Lighting (Blue)
Lights off
Lighting (Blue)
Lights off
Lighting (Red) —
TV POWER
CAUTION
• Please do not unplug the AC cord when the POWER indicator
is red.