Sharp Aquos LC 45GD4U - Manual (Page 22)

21
Watching TV
Press a/b to select the desired language
listed on the screen, and then press ENTER.
Press c/d to select “Air” or “Cable” for
ANALOG-A, then press a/b to move down.
Press c/d to select “Air” or “Cable” for
ANALOG-B, then press a/b to move down.
Press c/d to select “Air” or “Cable” for
DIGITAL, then press a/b to move down.
Press ENTER to enter the setting.
• This operation makes the TV search for
ANALOG-A, B and DIGITAL.
• There are 3 kinds of CATV system, including
Standard, HRC and IRC. Select the one
matches to your TV. Select Auto when you do
not know which one to select for ANALOG
antenna.
Initial setup
When you turn on the TV for the first time, it will automatically memorize the broadcasting channels where you
live. Perform the following steps before you press TV POWER on the remote control unit.
1. Insert the batteries into the remote control unit. (See page 13.)
2. Connect the antenna cable to the TV. (See pages 17 to 19.)
3. Plug in the AC cord to the AC outlet. (See page 10.)
Channel search
Channel auto search makes the TV look for all channels
viewable in the set area.
3 1
2
Language
Air/Cable
CH Search English
Español
Français
Language
Air/Cable
CH Search ANALOG-A
ANALOG-B
Air
Air
DIGITAL Air
CH Search
ANALOG-A [ ] 25 Air [ ] 20 Found
CH Search
ANALOG-B [ ] 25 Air [ ] 20 Found
2
ANALOG-A Air
Audio : MONO
Language setting
Select from among 3 languages: English, French and
Spanish.
Antenna setting
Make sure what kind of connection is made with your TV
when selecting “Air” or “Cable” for ANALOG-A, B and
DIGITAL.
Example
NOTE
• Make sure what kind of connection is made with your TV
when selecting “Air” or “Cable” for ANALOG-A, B and
DIGITAL.
• If no channel is found, make sure what kind of connection
is made with your TV and try EZ Setup again (see page
28).
Press c/d to select “Yes” for ANALOG-A,
then press a/b to move down.
Press c/d to select “Yes” for ANALOG-B,
then press a/b to move down.
Press c/d to select “Yes” for DIGITAL (Air/
Cable), and press a/b to move down.
Select “Search Start”, and then press
ENTER.
ANALOG-A Yes
ANALOG-B
No
Yes No
DIGITAL (Air) Yes No
Search Start
Language
Air/Cable
CH Search
CH Search
DIGITAL [ ] 25 Air [ ] 25 Found
Example
NOTE
• For digital, the “Cable” option will be displayed only when
the CableCARD is inserted.