Sharp UX-465L - Manual (Page 125)

Quick Reference Guide
123
Sending Faxes
Place your document
(up to 10 pages) face
down in the document
feeder.
Normal Dialing
1. Lift the handset or press
2. Dial the fax number.
3. Wait for the reception tone (if a person
answers, ask them to press their Start
key).
4. Press:
Rapid Key Dialing
Press the appropriate Rapid Key.
Transmission will begin automatically.
Speed Dialing
1. Press:
2. Enter the 2-digit Speed Dial number.
3. Press:
SPEAKER
SPEED
DIAL
Receiving Faxes
Press the RECEPTION MODE key until the
arrow in the display points to the desired
reception mode.
FAX mode: The fax machine automatically
answers on four rings and receives the
incoming document.
TEL mode:
Beep
RECEIVING
TAD mode: Select this mode when you go
out to receive both voice messages and
faxes.
START/MEMORY
FAX TEL
TAD
FAX TEL
TAD
FAX TEL
TAD
FEB 1 10:30
FEB 1 10:30
FEB 1 10:30
RECEPTION
MODE
Recording an Outgoing
Message
1. Press:
Display shows:
2. Press:
3. Press 1 (GENERAL) to record an outgo-
ing message for the answering machine.
Press 2 (TRANSFER) to record an outgo-
ing message for the Transfer function.
4. Pick up the handset, press the START/
MEMORY key, and speak into the hand-
set to record your message.
5. When finished, press the STOP key or
replace the handset.
6. Press:
OGM RECORDING
0
FUNCTION
STOP
START/MEMORY
START/MEMORY
START/MEMORY
STOP