Sharp UX-465L - Manual (Page 60)

Adjusting the Resolution and Contrast
58
Adjusting the Resolution and Contrast
If desired, you can adjust the resolution and contrast before sending a document.
Note: The resolution and contrast settings are only effective for sending a
document. They are not effective for receiving a document.
You must adjust the
settings each time you
don’t want to use the
default settings.
The default resolution
setting is STANDARD
and the default contrast
setting is AUTO.
Contrast settings
1
Load the document(s).
AUTO Use AUTO for normal
documents.
DARK Use DARK for faint
documents.
•
The document must be loaded
before the resolution and contrast
can be adjusted.
Resolution settings
STANDAR
D Use STANDARD for
ordinary documents. This
setting gives you the
fastest and most
economical transmission.
FINE Use FINE for documents
containing small letters or
fine drawings.
SUPER
FINE Use SUPER FINE for
documents containing
very small letters or very
fine drawings.
HALF
TONE Use HALF TONE for
photographs and
illustrations. The original
will be reproduced in 64
shades of gray.