SMSC SMC6516TF - Manual (Page 65)

5-7
Configuration Display Screen
The Configuration Display Screen is accessed from the Switch
Configuration Menu.
___________________________________________________
>>>> Configuration Display <<<<
Number of Ports............................. [ 18 ]
Port 1 MAC Address................ [ 00800F80000A ]
Switch IP Address.............. [ 0. 0. 0. 0 ]
Default SNMP Manager IP Address [ 0. 0. 0. 0 ]
Default Gateway IP Address..... [ 0. 0. 0. 0 ]
Subnet Mask.................... [ 255. 0. 0. 0 ]
SLIP Enable.................... [ Disabled ]
SLIP IP Address................ [ 0. 0. 0. 0 ]
SLIP Subnet Mask............... [ 255. 0. 0. 0 ]
SNMP Get Community Name............. [ public ]
SNMP Set Community Name............. [ public ]
Spanning Tree Protocol.............. [ On ]
Address Aging....................... [ On ]
Port Mirroring...................... [ Off ]
Dynamic Host Configuration Protocol. [ On ]
Error Logged.............................. [ 0000 ]
Boot Firmware Version.................... [ xx.xx ]
Software Load Version.................... [ xx.xx ]
Type Any Key To Continue ...
___________________________________________________
Figure 5-3. Configuration Display Screen
Display Fields
Number of Ports—Displays the number of ports contained in
the switch.
Port 1 MAC Address—Displays the MAC address of port 1.
Switch IP Address—Displays the IP address assigned to the
switch..
C
ONFIGURING AND
M
ONITORING