Motorola Timeport 250 - Manual (Page 27)

About Your Phone, Battery and SIM Card 23 English
2 Connect the travel charger to the phone.
AThe connector is keyed and can only be inserted one way.
3 Insert the travel charger plug into a suitable mains power
socket.
A beep-tone is heard and the battery icon flashes when charging
begins.
The state of charging is monitored and displayed by your phone.
See ‘Battery Meter Indicators’, later in this section for details.
AYour phone can be either on or off during charging.
! Do not press S during charging.
Desktop Charging Your Battery
AThe Desktop Charger is an optional accessory that allows
you to charge both the battery fitted in your phone and a
spare battery together (phone battery followed by spare
battery).
Batteries charge in about 2 to 3 hours, depending on the battery.
AIt is normal for batteries to become warm during charging.
1 Connect the travel charger to the desktop charger socket.
(The connector is keyed and can only be inserted one way.)
2 Plug the travel charger into a standard mains socket.
3 Insert your phone into the desktop charger as shown.
A spare battery can be charged on its own or at the same time as
your phone. Insert the battery into the desktop charger as
shown.
ACharge times will increase if you make or receive phone calls
while charging.
jade_en.bk : abtphone.fm5 Page 23 Wednesday, October 11, 2000 9:58 PM