Motorola Timeport 250 - Manual (Page 84)

Using the Options Menu 80 English
Select Phone Line
i Press E. Select the Quick Access feature or after the
tone, say the Voice Tag name.
This option allows you to switch between Line 1 and Line 2.
AAvailability depends on the type and settings of the SIM
card, and/or your subscription to this feature.
Adjust Ring Volume
This option is used to set the incoming call ring tone volume.
The volume will be displayed as follows:
Adjust the volume by pressing the volume buttons on the side of
your phone.
i Press E followed by the volume button to either
increase or decrease the ringer volume.
j Ring or Vibrate
i Press E. Select the Quick Access feature or after the
tone, say the Voice Tag name.
This option sets the way your phone alerts you to an incoming
call. The options are:
• Ring Only - the phone will ring with the tone specified by the
Set Ringer Tone option.
• Vibrate Only - the phone will vibrate using VibraCall™.
• Vibrate Then Ring - the phone will vibrate twice and then ring.
• No Ring Or Vibrate - the phone will just display the Call
message.
The setting you choose also defines the type of alert for an
incoming SMS message and an Internet service alert (except that
if you select Vibrate Then Ring, your phone will just vibrate).
j Set Ringer Tone
This option sets the tone your phone will make when an
incoming call is received on Line 1.
Standard Tone
Your phone makes a standard ringing tone.
Music Tones
There are different music tones like Hollywood, Jack n Jill, Buzzzz,
and so on.
When selected, your phone will produce one of these alternative
ringer tones.
jade_en.bk : opt_menu.fm5 Page 80 Wednesday, October 11, 2000 9:58 PM